Easy Geometric Hand-Stitched Wooden Slice Christmas Ornaments

Looking for an easy ornament DIY with a bit of funk and originality?

By Jon Doe

Today I’m sharing a simple tutorial for hand-stitched wooden slice Christmas ornaments using yarn scraps and pre-made wooden shapes.

Materials Needed Pre-cut wooden shapes Yarn scraps Electric drill with 1/8 inch drill bit Embroidery needle Pencil Scissors Small piece of scrap wood

Let's make Geometric Hand-Stitched Wooden Slice

Step 1

Begin by marking the spots that you plan to drill holes. For this design, I marked 6 equidistant dots around the perimeter, 1 in the middle, and 6 surrounding the center dot.

Step 2

Carefully drill through all of the dots. Use a piece of fine grit sandpaper to smooth any rough edges.

Step 3

Tie a loop at the end of one of your pieces of scrap yarn, as shown above. This will become the hanger for your ornament.

Step 4

Put the needle on the other end of your piece of yarn. Poke it from back to front through the top hole, then down through the middle one.

Step 5

Continue going up and down through the holes until you’ve completed the design. Every stitch will go through the middle hole for this particular pattern.

Swipe Up for the Full Tutorial!

For More Posts Like This Visit DIYs