1. DIYS
  2. Crafts

Candle Made from Concrete and Twigs

Wow your guests when they visit with this quirky and unique DIY candle made rom concrete and twigs. You could keep them small to decorate your shelves, or make a large version for a centerpiece. Read on to see just how we put this together.

Diy wood concrete candle art simple diy

With literally some sticks and concrete, you can make this super cool candle for your home or as a gift for a friend. Check out these step by step instructions complete with photos or keep scrolling to the bottom if you’d prefer to see a video tutorial instead!

Diy wood concrete candle art top

Diy wood concrete candle art rustic

For this project, you’ll need:

  • Fine particle cement mix
  • Water
  • Plate
  • Spoon
  • Tape
  • Oil
  • Branch
  • Secateurs
  • Plastic bowl
  • Candle
  • Scissors
  • Folding utility knife

Diy wood concrete candle art project

Diy wood concrete candle art

Step 1: Gather your materials!

Make sure to double check that list and gather all your things before you begin.

Diy wood concrete candle art materials

Step 2: cut the twigs

Use your secateurs to cut your twigs into pieces. You can make them whatever length you please, but try to make all of your pieces roughly the same size. I let mine very a little bit, but I didn’t want to make any too long or too short because I wanted to keep the weight distribution even so the piece would sit correctly and not tip. The concrete weights the finished product down well, but it’s still important to consider all factors.

Diy wood concrete candle art step 2

Diy wood concrete candle art step 2a

Step 3: arrange twigs

In the plastic bowl that you’re going to mould your concrete base in, arrange your twig pieces. You want to stand them up on their ends, angled slightly so that all the ends meet in the middle at the bottom and stick out the sides. Set them so they stick out all the way around and adjust them until you’re happy with the look. You’ll be able to move them around a little later even once the concrete mix is in, so you’ll still be able to make changes then, but you won’t be able to move them around anymore once the concrete starts drying; I’d suggest getting the look you want at the start.

Diy wood concrete candle art step 2b

Diy wood concrete candle art step 2c

Diy wood concrete candle art step 2d

Diy wood concrete candle art step 2e

Step 4: mix concrete

Add water to your fine particle cement mix and use your spoon to mix it to the right consistency. You want to do this mixing process in a different plastic container (I use disposable ones that I’ve saved from the recycling box for this step and the one above). Check the back of your cement’s packaging to make sure you get the right ratio of powered mix to water for that kind; it can vary. You’ll notice that I’m wearing gloves to work with the cement; most DIY cement mixes aren’t actuallythat harmful to your skin, but itcan be a hard substance to wash off and it can also dry your skin out or irritate it if you’re very sensitive, so I decided to play things safe and clean.

Diy wood concrete candle art step 3

Diy wood concrete candle art step 3a

Diy wood concrete candle art step 3b

Step 5: pour

Pour your cement mix into the container that you arranged your sticks in, pouring it right over the bottom ends of the sticks where they meet each other in the middle. You can use your spoon to help you get a more even pour and really scrape all the excess out. Once you’ve poured it all in, tap the sides of the tub lightly to get rid of air bubbles and even out the top, or use your spoon to smooth the mix.

Diy wood concrete candle art step 4

Diy wood concrete candle art step 4a

Diy wood concrete candle art step 4b

Step 6: set it

Set your candle in the centre of your piece while your cement mix is still wet. I set mine right in the middle of the ring of twigs around the edge and settled it into the mix so that it was in well but not sunk so far down that cement would get on the candle’s wick. When you’re happy with the placement of the candle, set the whole project aside to dry.

Diy wood concrete candle art step 6a

Step 7: peel away form

Once your piece has dried thoroughly and all the way through, use your scissors to make a cut in the edge. This will let you pull the disposable plastic tub apart and away from the concrete in order to make things a little easer to remove. Pull back all of the plastic and free your concrete piece from the container. If you want, you can use a piece of sandpaper or an abrasive block to smooth the outside surfaces and sides of your concrete piece, removing any rough spots or sanding down any inconsistencies.

Diy wood concrete candle art step 6b

Diy wood concrete candle art step 6c

Diy wood concrete candle art step 6d

Diy wood concrete candle art step e

Diy wood concrete candle art step 6f

Diy wood concrete candle art step 6g

And there you have it! Your wood and concrete candle holder is all finished. You can feel free to customize your pieces further from here as well; painting or embellishing it, for example, could transform it and add some personality. Just in case you’d like to try this project out for yourself, here’s a fantastic tutorial video to help you!

Leave a Reply

Your email address will not be published. Required fields are marked *